tkmtechs

  • The TKM Technical Services Team

    The TKM Technical Services team is 31 people: a Project Director, 3 engineers, 10 welders and 18 site technicians. The same people design, fabricate, test and install your equipment, working from our workshop in Sharjah and on client sites across the UAE and the GCC.

1 Project Director · 3 engineers · 10 welders · 18 site technicians · 20 years' leadership experience

Our People at a Glance

Role
Number
What they do on your project
Project Director
1
Leads every project from quotation to handover
Engineers
3
Site surveys, shop drawings, material selection and inspection planning
Welders
10
TIG welding of stainless and carbon steel to approved procedures
Site technicians
18
Installation, commissioning, repairs, shutdown work and servicing

Leadership

  • Mathews George — Project Director

    Mathews George brings 20 years of fabrication experience to the TKM Technical Services team. As Project Director, he leads our engineers, welders and site crews and is the single point of accountability on each job, from the first drawing to final testing and handover.

What Each Certificate Means for Your Project

  • Engineering

    Our engineers turn your requirement into a buildable design. They survey the site, prepare shop drawings for your approval before any steel is cut, choose the right grade and finish for your product, and write the inspection and test plan. They are also your technical contact during fabrication, answering questions on progress, changes and testing until the equipment is handed over.

  • Welding and Fabrication

    Our 10 welders work in-house at our Sharjah workshop. Every weld is made to an approved welding procedure specification (WPS), qualified by a procedure qualification record (PQR), and each welder holds a welder qualification certificate for the work. Hygienic welds are purged and finished to your specified Ra value.

  • Site Installation and Maintenance Crews

    Our 18 technicians install, commission and maintain equipment across all seven emirates, Saudi Arabia, Oman and the wider GCC. They handle emergency repairs and planned shutdowns, work under our ISO 45001 safety system, and hand over as-built drawings and test reports at the end of every job.

  • Electrical and Automation

    Our electrical team builds and programs PLC and HMI panels in-house, so mechanical and control work arrive tested together. You deal with one team for the whole system instead of coordinating a separate panel builder. It also means one point of contact if a control fault needs attention after handover.

Skills Across Our People

Skill
Who does it
Site surveys and shop drawings
Engineers
Material selection and inspection planning
Engineers
TIG welding of stainless and carbon steel
Welders
Purged hygienic welds
Welders
Pickling, passivation and polishing to Ra
Workshop team
Hydrostatic and dye penetrant testing
Workshop QA, witnessed on request
PLC and HMI panel building and programming
Electrical team
Installation, commissioning and handover
Technicians
Emergency repairs, shutdowns and servicing
Technicians
  • Safety Comes First

    Everyone works under our ISO 45001 occupational health and safety system, issued by ASCB. It covers the workshop and every client location, including work inside running plants during installation and shutdowns.

  • Working at Your Plant

    Before our crews arrive, we plan transport and permits, so they are ready to work on day one. At the end of every job they hand over as-built drawings and test reports. The same people return for servicing, so they already know your equipment.

  • Where Our Crews Work

    Our crews install and service equipment in Sharjah, Dubai, Abu Dhabi and Al Ain, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. For Saudi Arabia, Oman, Qatar, Bahrain and Kuwait, equipment is fabricated and tested in Sharjah, then installed by our own team on site.

What Makes Our People Different

  • In-house, not subcontracted — the people who build your equipment are TKM employees, from welding to installation.
  • Hygienic know-how — they understand dead legs, drainability and surface finish, the details that decide food and pharma audits.
  • Mechanical and controls together — our electrical team builds the panels, so the whole system is tested as one.
  • Documented work — every job they finish comes with records you can audit.

How Our People Work With You

  • One project manager per job — one name and one phone number from quotation to handover.
  • Engineers who visit — surveys before drawings, so the equipment fits the space it goes into.
  • Open workshop — you and your inspector are welcome to see your equipment being built and to witness testing.
  • Records kept — drawings and test reports stay on file for future servicing.

From Enquiry to Handover: Who You Deal With

Stage
Who handles it
Enquiry and quotation
An engineer reviews your drawing or process and replies within one working day
Site survey and drawings
Engineers survey the site and issue shop drawings for your approval
Fabrication
Welders build your equipment in our Sharjah workshop
Testing
Hydrostatic, dye penetrant and surface finish tests, which you can witness
Installation and commissioning
Site technicians install, commission and hand over documents
Aftercare
The same team handles servicing, repairs and spares
  • What Clients Say About Working With Us

    "Great design, extraordinary service and prompt delivery. Also great value for money. We are delighted with the quality of both tanks and steel pipes." — Binu, BanoPuratos

Questions About Our People

The TKM Technical Services team is 31 people: a Project Director, 3 engineers, 10 welders and 18 site technicians.

Mathews George, Project Director, who has 20 years of fabrication experience.

Yes. Each welder holds a welder qualification certificate and works to approved WPS and PQR. These records
are included in your documentation pack.

Our own site technicians install, commission and maintain the equipment we build.

Yes. Send your drawing or process details and an engineer will reply within one working day.

Yes. Our engineers and welders design out dead legs, slope lines to drain and finish surfaces to the Ra your specification calls for.

Yes. The people who install your equipment also service and repair it, and your drawings and test records stay
on file.

Yes. Our crews handle planned shutdowns and emergency repairs across the UAE, working to your production schedule.

Call +971 6 534 9455, send a WhatsApp message to +971 50 393 6196, or email info@tkmtechs.ae. We reply within one working day.

Yes. Every fabricated item carries a 12-month warranty on workmanship and materials from handover, stated in each quotation.

Our engineers survey the site and prepare shop drawings, which you approve before fabrication starts.

factory-design

Join the TKM Technical Services Team

We look for welders, fitters, engineers and technicians who take pride in documented, well-finished work. See current openings on our careers page.

Talk to Our Engineers

Send your drawing or describe your process. Someone from the TKM Technical Services team will reply within one working day.

Scroll to Top